Atlas Ingersoll Ect Tungsten Carbide Well Drilling Bit 50 55 60mm 12 Degree

High quality tungsten carbide T6 and YK05 rock drilling bits for mining, tunnel

1 Product description of Rock Drilling Bits

We use our 45CrNiMoVA material to produce tungsten carbide and YK05 tapered drill bits, both of which are world-renowned drill bit production materials.

Advanced technology - we produce cone drill thermal technology, which is currently producing cone drill bit of the most advanced technology.
When carbide or decreased permeability signs of damage, should be re-grinding button drill Fixed grinding program usually brings good work habits.

For example, check bit, end mill or milling then move again after a plurality of holes. Premature grinding is not necessarily uneconomic, because less need to wear carbide. The best reground, it will not be damaged and reduced productivity.

Correct grinding greatly increases the service life of the drill bit. But equally important, it also improves the performance of the entire drilling operation, especially straightness of the hole.

Taper taper drill drilling is the most common, which head diameter ranging from 48mm to 26mm. Sector skirt carbide drill using hot pressing, fine cone drill fan performance and long service life.

2 Product Data​ of Rock Drilling Bits

We produce various tapered button bits of different degrees as follows:

Bit diameter: 32mm ~ 41mm;
Tapered degree: 4°46’, 6°, 7°, 11°, 12°;
Shank sizes: Hex. 19mm, Hex, 22mm and Hex. 25mm;
Buttons configuration: 4 buttons, 5 buttons, 6 buttons, 7 buttons, 8 buttons