Payment & Shipping Terms:
|Type:||Drill Bit||Machine Type:||Drilling Tool|
|Use:||Pneumatic Grinding||Rotation Speed:||3500 RPM Max|
Pneumatic Grinding Machine Pd200 Air Grinder;silicon carbide grinding wheel
Description: PD200 Air grinder sed with small rock drill on non-power source scene and working site, solving the drill's tool sharpening problem.It is a ideal supporting tools for air rock drill and diesel engine.It brings more convenience, and it will improve the rock drilling work efficiency and bring the considerable economic efficiency.
PD200 Air grinder sed with small rock drill on non-power source scene and working site, solving the drill's tool sharpening problem.It is a ideal supporting tools for air rock drill and diesel engine.It brings more convenience, and it will improve the rock drilling work
Our main products are as below:
Construction & Mining & Rock Drill Tools:
A. DTH Hammer and Bit (2''-24''), Overburden Drilling System; RC System.
B. Top Hammer (drill hole dia.: 33 ~ 152mm).
1) Thread Tools (Button Bits, Rod, Coupling, Shank Adaptor): (R25/28/32/38, T38/45/51, ST58,GT60).
2) High Rang Soundless Cracking Agent (dia. 40 ~ 50mm).
Quarrying Drill Tools (drill hole dia.: 17 ~ 45mm).
1) Taper Drill Tools (Bit: button/chisel; Rod: Tapered/Integral), Carbide Tips, Segment, Grinding Wheel, Grinder.
3) Pneumatic Rock Drill: Hand-held (Y24, TY24C), Air leg (YT28) and Gasoline (YN27J).
4) Expansive Mortar (dia. 30 ~ 35mm); Hydraulic Rock Splitter PD40-250, Aluminum Cylinder.
5) Air Pushing Bag, Water Bag; Pneumatica Splitter G10, Hand Splitter, etc.
6) Hydraulic Breaker hammer, Paving breaker TPB40, 60, 90 for rock or concrete demolition.
7) PD28, PD45, PD90, PD115/HC20 Excavator mounted rock drilling.
1. Wear necessary labor insurance products at work
2. Before using the grinding machine, first check whether the screws are loose, and release the condensed water in the tube to prepare for the replacement of various models. At the same time, the movable part must be oiled before use.
3. The grinding machine should reduce the number of air impacts as much as possible. The operating handle should be lightly pushed. If the fault is found during operation, it must be stopped immediately. After the treatment is completed, it can work.
4. Grinding machine, there should be enough butter, do regular inspection, regular oil injection.
5. After the grinding machine is used, the impurities and grinding wheel powder must be rinsed clean.
|Rotation speed||3500 RPM max||3500 RPM max|
|Sharpening angle||110 degree||110 degree|
|Operating pressure insufficient||6.0bar||6.0bar|
|Air consumption at 6 bar||1.5mc/min||1.5mc/min|
|Abrasive grinder diameter||152mm||152mm|
|Bench version weight||36kg||36kg|
|Portable version weight||37kg||37kg|