DHD 340-152MM DTH Hammer Low Air Consumption For Well Drilling CE Certificated
Detailed Product Description
DTH Bit DHD340-152MM with YK 05 tungsten carbide with good quality
Description: We manufacture DTH Hammers in different sizes ranging from 3 to 12. These hammers are
made corresponding to Drilling Bits to carry out prevalent objectives. These hammers are used in various
down the hole operations like bench Drilling. These are valve less hammers with optimized air cycle
frequency. These are heavy duty hammers that well at greater depths demanding less air usage, delivering minimum performance loss.
We offer IR hammer, DHD3.5, DHD340a, DHD360, DHD380, COP and QL hammer. The optimum range of
hole size for blast drilling with DTH is 90mm to 254 mm, smaller blast holes are generally drilled using top
hammer, and larger holes generally use rotary machines. Our hammer like COP and QL are known for their
reliability and longevity.
The Characteristics of Valveless DTH Hammer:
1. High Impact Frequency and Higher Penetration;
2. Low air consumption and Fuel saving;
3. No Exhaust Tube Recess;
4. Simplicity of design and Easy Service.