Payment & Shipping Terms:
|Type:||Cylindrical Grinding Machine||Disc Diameter:||125*63*32mm|
|Max. Grinding Diameter:||250mm||Weight:||15KG|
|Dia Pressure:||0.45Mpa||Idling Rotational Speed:||5300min|
PD125 Pneumatic Integral steel grinder for chisel bits;GrindChisel Bits And Integral Drill Rods Sharpeninging Wheels
1. The foundation of the grinding machine should be firm, the specifications of the grinding wheel should meet the requirements, and a protective cover should be installed.
2. When installing the grinding wheel, do not hit with a hammer. The hole should be matched with the shaft. The shaft end fastening nut should be firm.
3. If the grinding wheel is out of round, too thin or worn, it should not be used when the edge of the clamping plate is less than 30mm.
4. The bit bracket should be installed firmly and the bracket surface should be flat. The distance between the bracket and the end face of the grinding wheel must not exceed 3mm.
5. Before starting, check and confirm that the bolts are not loose on the grinding wheel splint, the grinding wheel has no cracks, the protective device is firm and the electrical device has no leakage, and then it can be started. After starting, the grinding wheel can be operated normally before grinding.
This pneumatic machine is designed for grinding the chisel bits and integral drill rods.Your worn bit or rod can be reused after being grinded by our grinding machine, to prolong their service life and save your money. It's hand-held using, very convenient. And we have CE certificate for this machine.
PD-125 Air grinding machine (for Integral rod, chisel bits, button bits sharpening)(integral drill rod chisel type) milling machine surface grinder. Its Capable for re-grinding of Blunted Drill Steel Rods at an angle of 110o.
Since the BCG is subjected for arduous working conditions in the Mines, Quarries. The Grinder is now developed with specialized design and mounted on Drill Steel Rods, possessing high design and mounted on Drill Steel Rods, possessing high strength balance and easy to transport and simple to setup.
|Rotaton speed||3500 RPM max|
|Operating pressure insufficiet||6.0bar|
|Air consumption at 6 bar||1.5mc/min|
|Abrasive grinder diameter||152mm|
|Bench version weight||36kg|
|Portable version weight||37kg|
PD200 Air grinder shed with small rock drill on non-power source scene and working site, solving the drill’s tool sharpening problem. It is a ideal supporting tools for air rock drill and diesel engine. It brings more convenience, and it will improve the rock drilling work efficiency and bring the considerable economic efficiency.
|Idling rotational speed||5300min|
|Inner dia of air pipe||19mm|