Payment & Shipping Terms:
|Material:||A C W/A PA GC||Code:||D/E/G G/H/L K/L M/N P/Q/R S/T Y|
|Outer Diameter:||125mm||Hole Diameter:||32mm|
B125*63*32 Grinding Stone, Grinding Wheels;silicon carbide grinding wheel;tungsten carbide grinding wheel
Rock drilling tools manufacturer ProDrill Grinding Stone is a special abrasive material for sharpening chisel carbide bitof integral drill steels to cycle and extend then use life of bits and drill rods and then achieves less cost of drilling cost at certain level for your drilling benefits.
The hardness of the grinding wheel refers to the difficulty of the abrasive grains on the surface of the grinding wheel falling off under the action of the grinding force. The hardness of the grinding wheel is soft, which means that the abrasive grains of the grinding wheel are easy to fall off, and the hardness of the grinding wheel is hard, indicating that the abrasive grains are relatively difficult to fall off. The hardness of the grinding wheel and the hardness of the abrasive are two different concepts. The same kind of abrasive can be made into a grinding wheel of different hardness, which is mainly determined by the combination of the amount of energy, the quantity and the manufacturing process of the grinding wheel. The significant difference in grinding is that the grinding wheel has “self-sharpness”. The hardness of the grinding wheel is chosen to be the self-sharpness of the grinding wheel. It is hoped that the sharp grinding particles should not fall off too early, nor should they be blunt and not fall off.
1. It is in high hardness and brittle.
2. it s grain edges are sharp and it’s of excellent capacity of heat-transmission.
3. It is suitable for the frontal and qauge grinding of chisel bit and integral steel/rod
Grinding Wheel-for chisel bit and integral drill rod grinding.
1 grinding wheel for chisel bit and integral rod grinding
2 high durability and smooth design
3 popular by grinding users
|Material||AC W/A PA GC|
|Code||D/E/G G/H/L K/L M/N P/Q/R S/T Y|